IMPORTANT – Delay in delivery due to lockdown & curfew restrictions. Click here for more information.

E3DP PLA+ | Metallic Gold

(2 customer reviews)

Material: PLA+ (Poly Lactic Acid)

Diameter: 1.75 mm

Print Temperature: 190-210 Degree Celcius

Weight: 1.4 Kg (Gr. Wt.) | 1 Kg (Nt. Wt.)

Origin: Made in India

1,000.00 incl. GST

SKU E3DP-PLAP-MGO-1KG Category

Description

Our E3DP filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality.

The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.02mm._

PLA, or Polylactic Acid, is a commonly used thermoplastic material that does not require the use of a heated print bed. Blending a mixture of plant-based materials and polymers creates E3DP PLA+. Because of the lower melting temperatures and lack of warping, PLA+ filaments retain their color vibrancy and are a common choice for displays or small household prints. PLA (Polylactic Acid) is derived from renewable resources such as cornstarch or sugarcane.

PLA+ has a much nicer finish and better mechanical properties as compared to the PLA filaments.

 


 

Characteristics and Advantages:

  1. Recommended extrusion temperatures: 190-210 ℃
  2. Recommended heating temperatures: 0-70 ℃
  3. Melting point: 165 ℃ – 180 ℃
  4. True diameter: 1.75mm
  5. Weight: 1000 gms material and Spool Weight extra
  6. Elongation at break: 4%
  7. Density: 1.24g/cm³
  8. No jamming: Excellent fluidity, feeding smoothly, stable output
  9. No drawing: Shaping easily, excellent surface glossiness
  10. No bubbles: Critical factor of the filament quality

 


 

Benefits of Using E3DP PLA+:

  1. Vacuum packaging supplies to ensure safe transportation and no moisture during transportation.
  2. Longer shelf life after opening(≥3 weeks)
  3. More stable printing
  4. It works with a wide temperature range and there is no problem of adhesion on the construction surface of your 3D printer. 
  5. Reasonably strong and not excessively fragile.

 


 

The 3D printed object will have a glossy finish, less distortion, easy to use and no heat bed is required. The E3DP filaments are universally designed and compatible with 3D printers using a 1.75 mm diameter filament, with a dimensional accuracy of +/- 0.02 mm.

 

Disclaimer: Due to continued improvement in terms of the spool and packaging, the product illustrated may vary slightly from the actual product.

Additional information

Weight 1 kg
Dimensions 22.5 × 21 × 8 cm
Gross Weight

1.4 Kg

Spool Dimensions

54x88x200x61 mm

2 reviews for E3DP PLA+ | Metallic Gold

  1. Tamil Arasan

    Sexy sheen on this colour. Wouldn’t say that it looks like real gold though

  2. Mike

    -Strength
    Strength of this PLA is on the higher side.
    I have used this filament to make a stand
    for my ender 3v2 which dampen the
    vibration during operation. Till now it works
    smooth and fine.
    *Low infill will help you save material and
    increasing infill line multiplier it help you
    Increase strength which is very effective
    with this filament.
    Compliant mechanisms can be made even
    though it is brittle because it holds much
    load before fracture. It will fail no doubt to
    it “but how long does it take to fail”
    matters and I am satisfied with this.

    -Bed adhesion
    Company recommends to use heat bed
    @60degreeC and with that configuration it
    works well. Since PLA usually don’t require
    heatbed I tried without heating the bed
    and printed but it seems to warp a bit for
    longer prints but if you want it to run so,
    use a glue stick which adds to bed
    adhesion. So it’s better to stick with
    company’s guidelines here.

    -Quality
    Filaments measures up to 1.73mm just
    like they have claimed to be 1.75mm and
    they have mentioned a tolerance of 0.02
    so it is okay. Since the filament Dia is
    almost the same we can use it for tight
    fits and those require high accuracy like
    fits and joints, holes, etc. Calibration cube
    measured close to 20mm which is as
    expected.

    -Overall value
    This colour is same as advertised by the company and it looks cool.
    Comparing it’s price of around 900 rupees it is worthy and definitely recommendable.

    These guys have a collection of PLAs of different colour&composition. I will try them too.
    Initially I was doubtful to purchase from Exton due to a review from someone, but turns out that person didn’t know how to print, but if you are facing any issue directly contact the service centre through the number given in the filament package, they do offer great guidance. Overall, I would definitely recommend you to purchase from them.

Add a review

Your email address will not be published.